BS15 Dust Extraction Unit
SKU: HME1112
This Extraction unit is specifically designed for use with Bandsaws. It will connect directly to the standard bottom extraction port on a Bandsaw and is also designed to connect to the universal band saw top extraction kit. The system removes fine dust which would normally enter the operators breathing zone. It is low level and sits below the working bed height of most Bandsaws. Such is the versatility of this extraction unit, it can be used on other applications such as small dust manifolds i.e. multiple fret saws and sanders.
Enquire about this product
Specification
- Filter area: 1.4m²
- Dust tray capacity 18 litres
- Inlet sizes 1 x 100mm & 1 x 80mm diameter ports or 2 x 80mm diameter ports or 1 x 120mm port on one side only
Construction:
Heavy duty steel construction with tough powder coat finish
What's Included:
- Single push button start
- Explosion relief facility included
Colour & Weight:
Grey / Red – 74kg
Dimensions:
- W683mm x D673mm x H861mm
Power:
400v / 3 Phase / 50Hz
Options:
Starter and a certified explosion vent relief panel is available. Single phase model available
Installation:
Floor fix and hard wire
Warranty:
12 months manufacturer’s warranty
General Maintenance:
12 monthly safety test. Refer to User’s manual. Shake filter trays after each use and regularly empty slice tray. Use a hand held water sprayer to dampen top layer of dust to avoid disturbance.
Health & Safety Consideration:
Conforms to COSHH and European Standards
