Specification

  • Vacuum forming: 2 Sheets sizes 305 x 305 mm & 305 x 152mm, allow a maximum mould height of 115 mm.
  • Dome blowing: Using cast acrylic or PVC sheet, with supplied rings, allows domes of Ø305, 225 and 150 mm to be produced
  • Plastic dip coating: A 5 litre tank containing thermoplastic powder, aerated by compressed air – allows smooth plastic coating to be applied to heated metal.
  • Injection moulding: Material is heated in oven, transferred to the injection moulding unit and injected into a suitable mould (2 moulds supplied).
  • Extrusion: Heated material extruded through an ‘I’ section nozzle into a cooling water tube.
  • Plastic welding: Integral hot air torch for welding.

Construction:

Robust steel construction

Colour & Weight:

Blue / Grey / Yellow

Dimensions:

  • W1760 x D745 x H1415mm
  • Weight 152kg

Power:

240v / 1 Phase / 50Hz

Installation:

Floor Mobile

Warranty:

12 months manufacturer’s warranty.

General Maintenance:

12 monthly safety test.

Health & Safety Consideration:

BS4163